Sup 8-E 10GE (SFP+), 1000BaseX (SFP) with 8 SFP+ Ports

[Bear2017]

Dear,

Does anyone can help me answer the question relate to the supervisor linecard.

NAME: "Switch System", DESCR: "Cisco Systems, Inc. WS-C4503-E 3 slot switch "
PID: WS-C4503-E , VID: V03

NAME: "Supervisor(slot 1)", DESCR: "Sup 8-E 10GE (SFP+), 1000BaseX (SFP) with 8 SFP+ Ports"
PID: WS-X45-SUP8-E , VID: V06 

NAME: "Linecard(slot 2)", DESCR: "1000BaseX (SFP) with 48 SFP Ports Jumbo Frame Support"
PID: WS-X4748-SFP-E , VID: V01 

My question is: 1000BaseX (SFP) with 8 SFP+ Ports (On WS-X45-SUP8-E)  can be use (same) as 48 SFP port (On WS-X4748-SFP-E) or not ?

I already asking the cisco engineer, he say YES, but i am confusing that if i using this 8 port as normal SFP port, is there any impact to supervisor ( management ) functions ? and should i using it, currently i can't extend this devices capacity

Thanks you for any advices 

[Reza Sharifi]

My question is: 1000BaseX (SFP) with 8 SFP+ Ports (On WS-X45-SUP8-E)  can be use (same) as 48 SFP port (On WS-X4748-SFP-E) or not ?

Yes, these ports can be used for anything you want, and no impact on the sup. You can use them as 1Gig or10Gig pending on the optic you use.

HTH