Support for 1GE SFP in C9606R/SUP2

[alf]

Hello folks,
I´ve recognized that a limited support for 1G SFPs on C9606/C9600X-SUP-2/Linecard C9600-LC-48YL has been introduced with IOS-XE 17.14.1 (a maximum of eight SFP-1G-LH and/or SFP-1G-SX transceiver modules are supported per system).
Currently other 1G transceivers do not work.
Does somebody know if the 2 listed supported 1G transceivers above are expanded to the more common GLC-LH-SMD/GLC-SX-MMD, because those were more commonly used in the Catalyst environments.
Best regards,
Alfred

[marce1000]

   - Ref : https://tmgmatrix.cisco.com/?npid=2222
              GLC-LH-SMD/GLC-SX-MMD are in the list and thus compatible,

  M.

[alf]

Thanks for the comment, but thats not correct for SUP2. Just see the comment in TMG.

[marce1000]

 - @alf  Thanks for the comment, but thats not correct for SUP2. Just see the comment in TMG.
                                                                                                       Can't find the comment,

  M.

[Leo Laohoo]

---

@alf wrote:
a maximum of eight SFP-1G-LH and/or SFP-1G-SX transceiver modules are supported per system

---

That restriction is meant for the C9500X-60L4D. 

[alf]

Thanks for the comment. We are in the context of modular devices C9606R.

[Leo Laohoo]

I got a better solution:  Get either a 3850-24S (with C3850-NM-2x40G) or 9300X-24Y (with C9300X-NM-2C/4C) and connect it back to the 9600.