I have two 4500x setup with vss, and working.
i do however get the following messages during boot up:
%SW_LEVEL-6-RESULT: Operational redundancy mode is UNKNOWN, due to software license-level mismatch at ACTIVE and STANDBY.
Module name Image level Priority Configured Valid license
--------------------------------------------------------------------
WS-C4500X-16 entservices 1 NO entservices
ipbase 2 NO ipbase
Module Name Role Current Level Reboot Level
--------------------------------------------------------------------
WS-C4500X-16 Active entservices entservices
800_1stSt#dir slavebootflash:
Directory of slavebootflash:/
16162 -rw- 122470656 Jul 8 2014 17:22:17 +00:00 cat4500e-universal.SPA.03.04.04.SG.151-2.SG4.bin
16163 -rw- 4813 Aug 20 2014 07:46:48 +00:00 startup-config.converted_vs-20140820-074112
16164 -rw- 6504 Aug 20 2014 11:44:49 +00:00 startup-config.saved_vs-20140820-114449
1692037120 bytes total (1569308672 bytes free)
800_1stSt#dir
Directory of bootflash:/
95042 -rw- 122470656 Jul 8 2014 17:24:14 +00:00 cat4500e-universal.SPA.03.04.04.SG.151-2.SG4.bin
95043 -rw- 4922 Aug 20 2014 07:27:28 +00:00 startup-config.converted_vs-20140820-072717
95044 -rw- 4922 Aug 20 2014 07:52:28 +00:00 startup-config.saved_vs-20140820-075228
how do i get both to entservices level?
thanks
