switch 2960S username problem

[mohamed sebaey]

After i have already configured my cisco switch 2960 , i configured my console as the below

line con0

password xx

login

exit

after i reboot my switch , i found that the switch asked me for username . However i did not configure username , how can i solve this problem , without password reset . I have already configured 15 switch , 100% this problem will be in all switches.

thank you

[mohamed sebaey]

Thanks you so much , i apperciated for your help.Again to get my problem so clear , I have Cisco switch 2960S and configured under console a password with login after i reboot the switch , i found that switch asked me about username and password. I tried other switch without put a password under console , and reboot switch all things are fine. Waiting for your help. I didnot configure any username

thanks

[Jan Rolny]

In this case please post sh version to clarify IOS and switch version.

[ALIAOF_]

So you are saying that other switches are fine just this one switch has an issue?  Why don't you just reset it?

[paul driver]

Hello

You may need to perform a password recovery

http://www.cisco.com/en/US/products/hw/switches/ps628/products_password_recovery09186a0080094184.shtml

Res
Paul

Sent from Cisco Technical Support iPad App

[mohamed sebaey]

The switches which have the problem aout 15 switches , it will be a long time to reset 15 switches.