Trying to be more specific...
We got this type of config...
.
.
interface FastEthernet0/22
description OF1
no switchport
bandwidth 25000
ip address 199.xxx.xxx.xxx 255.255.255.248
speed 100
duplex full
!
interface FastEthernet0/23
description OF
no switchport
ip address 199.xxx.xxx.xxx 255.255.255.224
duplex full
!
interface FastEthernet0/24
description EN
no switchport
ip address 199.xxx.xxx.xxx 255.255.255.252
speed 100
duplex full
!
interface GigabitEthernet0/1
switchport mode dynamic desirable
!
interface GigabitEthernet0/2
switchport mode dynamic desirable
!
interface Vlan1
no ip address
!
interface Vlan2
no ip address
!
interface Vlan33
no ip address
!
ip default-gateway 199.xxx.xxx.xxx
ip classless
ip route 0.0.0.0 0.0.0.0 199.xxx.xxx.xxx
ip http server
!
snmp-server community sunny RO
snmp-server manager
alias exec s show ip int br
alias exec sr show run
alias exec c conf t
!
AND ... we want to read SNMP on port (0/22 Individually) (0/23 individually) and the (general port 0/24...who is conected to our ISP router)...
Thanks!