Hi All,
I'm configuring this switch for AVAYA PABX. At moment, I have configured 2 VLANs. VLAN1 is my voice VLAN and VLAN2 is my DATA VLAN. I have also configured IP routing for inter vlan communication. I am not sure how do I configure DHCP so that when my PC connect with AVAYA phone then it should get different IP address and AVAYA phone is going to directly connect with the switch and it should get different IP address.
Please find following switch config which I have done it so far....
=======================================
INDOFFICESWI01#sh running-config
Building configuration...
Current configuration : 2654 bytes
!
version 12.2
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname INDOFFICESWI01
!
enable secret xxx
!
no aaa new-model
ip subnet-zero
ip routing
!
!
!
!
dot1x system-auth-control
no file verify auto
spanning-tree mode pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
interface GigabitEthernet0/1
switchport access vlan 2
switchport mode access
switchport voice vlan 1
mls qos trust dscp
!
interface GigabitEthernet0/2
switchport access vlan 2
switchport mode access
switchport voice vlan 1
mls qos trust dscp
!
interface GigabitEthernet0/3
switchport access vlan 2
switchport mode access
switchport voice vlan 1
mls qos trust dscp
!
interface GigabitEthernet0/4
!
interface GigabitEthernet0/5
!
interface GigabitEthernet0/6
!
interface GigabitEthernet0/7
!
interface GigabitEthernet0/8
!
interface GigabitEthernet0/9
!
interface GigabitEthernet0/10
!
interface GigabitEthernet0/11
!
interface GigabitEthernet0/12
!
interface GigabitEthernet0/13
!
interface GigabitEthernet0/14
!
interface GigabitEthernet0/15
!
interface GigabitEthernet0/16
!
interface GigabitEthernet0/17
!
interface GigabitEthernet0/18
!
interface GigabitEthernet0/19
!
interface GigabitEthernet0/20
!
interface GigabitEthernet0/21
!
interface GigabitEthernet0/22
!
interface GigabitEthernet0/23
!
interface GigabitEthernet0/24
!
interface GigabitEthernet0/25
!
interface GigabitEthernet0/26
!
interface GigabitEthernet0/27
!
!
interface GigabitEthernet0/28
!
interface GigabitEthernet0/29
!
interface GigabitEthernet0/30
!
interface GigabitEthernet0/31
!
interface GigabitEthernet0/32
!
interface GigabitEthernet0/33
!
interface GigabitEthernet0/34
!
interface GigabitEthernet0/35
!
interface GigabitEthernet0/36
!
interface GigabitEthernet0/37
!
interface GigabitEthernet0/38
!
interface GigabitEthernet0/39
!
interface GigabitEthernet0/40
!
interface GigabitEthernet0/41
!
interface GigabitEthernet0/42
!
interface GigabitEthernet0/43
!
interface GigabitEthernet0/44
!
interface GigabitEthernet0/45
!
interface GigabitEthernet0/46
!
interface GigabitEthernet0/47
!
interface GigabitEthernet0/48
!
interface GigabitEthernet0/49
!
interface GigabitEthernet0/50
!
interface GigabitEthernet0/51
!
interface GigabitEthernet0/52
!
interface Vlan1
description Voice VLAN
ip address 192.168.254.100 255.255.255.0
!
interface Vlan2
description Data VLAN
ip address 192.168.252.100 255.255.255.0
!
ip classless
ip http server
=======================================
I've configured first 3 ports for testing purpose... You quick help will be much more appreciated...
Also, want to inform you that at present my PABX ip is in the range of 192.168.254.x. and that is the reason I have keep VLAN1 IP in this range.
Thanks,
Pans
