02-07-2014 09:01 AM - edited 03-07-2019 06:05 PM
I have a Switch 3560/24 ports
i want know, how can i allow two vlans in a one switchport?
Vlan voice and vlan data.
02-07-2014 09:07 AM
Hi,
int f0/0
switchport mode access
switchport access vlan 10 <<<<< data vlan
switchport voice vlan 20 <<<<<< voice vlan
Regards
Alain
Don't forget to rate helpful posts.
02-07-2014 09:28 AM
Hi, alain.
I try, but the switchport continiuos in one vlan
SWFISA11-1(config)#interface fastEthernet 0/1
SWFISA11-1(config-if)#switchport mode access
SWFISA11-1(config-if)#switchport access vlan 220 <<<< data vlan
SWFISA11-1(config-if)#switchport access vlan 200 <<<<< voice vlan
SWFISA11-1#show vlan brief
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Gig0/1, Gig0/2
30 VLAN0030 active Fa0/5, Fa0/21
128 MedicaSur active
200 VLAN0200 active Fa0/1, Fa0/6, Fa0/7, Fa0/8
Fa0/9, Fa0/10, Fa0/12
210 VLAN0210 active Fa0/2, Fa0/11, Fa0/13, Fa0/16
Fa0/17, Fa0/18, Fa0/19, Fa0/20
220 VLAN0220 active Fa0/15
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active
I try, but the switchport continue in one vlan.
Maybe the configuration of the vlan?? need configuration additional??
02-07-2014 10:21 AM
Hi,
SWFISA11-1(config)#interface fastEthernet 0/1
SWFISA11-1(config-if)#switchport mode access
SWFISA11-1(config-if)#switchport access vlan 220 <<<< data vlan
SWFISA11-1(config-if)#switchport access vlan 200 <<<<< voice vlan
You should do switchport voice vlan 200
Regards
Alain
Don't forget to rate helpful posts.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide