Hi Guys, I have 2 management switches 48 port. switch 1 is configured with flow control. But not in switch2. but still i can see flow record in switch2. how it is coming ??
SWITCH1: (sh run)
flow record FLOW-RECORD
description Stealthwatch Netflow Record
match datalink mac source address input
match datalink mac destination address input
match datalink vlan input
match ipv4 ttl
match ipv4 tos
match ipv4 protocol
match ipv4 destination address
match transport source-port
match transport destination-port
match interface input
match ipv4 source address
match flow direction
match flow cts source group-tag
match flow cts destination group-tag
collect transport tcp flags
collect interface output
collect counter bytes long
collect counter packets long
collect timestamp absolute first
collect timestamp absolute last
!
!
flow exporter FLOW-EXPORTTER
destination 10.10.160.32
source Vlan1
transport udp 2055
!
!
flow monitor FLOW-MON
exporter FLOW-EXPORTTER
cache timeout inactive 60
cache timeout active 15
record FLOW-RECORD
SWITCH 2:
KMDS-SMART-MGMT-SW2#sh flow record
flow record wireless avc basic:
Description: Basic Wireless AVC template
No. of users: 0
Total field space: 78 bytes
Fields:
match ipv4 protocol
match ipv4 source address
match ipv4 destination address
match transport source-port
match transport destination-port
match flow direction
match application name
match wireless ssid
collect counter bytes long
collect counter packets long
collect wireless ap mac address
collect wireless client mac address
flow record netflow ipv4 app-client-server-stats:
Description: Application client server statistics
No. of users: 0
Total field space: 78 bytes
