Switch interface set up for voice - third party phones and PABX

[Fabio Francisco]

Hi All,

Please I need help. I set my interfaces of our Cisco 2960 switches as follow:

interface FastEthernet0/1
switchport mode access
switchport voice vlan 60
mls qos trust dscp
spanning-tree portfast

Vlan 1 as native vlan for data and vlan 60 for voice

The phones are NEC DT700 which has CDP option.

So far I know that both vlans are working and I also can see the NEC phone on the switch when I display sh cdp neighbours

Can someone here please confirm that my set up is correct.

Thanks for reading.

Cheers,

Fabio

[ranraju]

the configurations are looking good to me. Voice vlan is 60 and Data Vlan is 1. So until you have connectivity on those vlans the phone should work with out any issues.

Regards,

ranraju