07-28-2016 01:33 AM - edited 03-08-2019 06:47 AM
We need best model for distribution switch along with SFP module name for the following
07-28-2016 01:37 AM
07-28-2016 05:09 AM
Hi,
We need to add this below module right?
C3850-NM-4-10G 4 x Gigabit Ethernet/4 x 10 Gigabit Ethernet network modules
In the datsheet
Note:The C3850-NM-4-10G module is supported only on the 48-port Gigabit Ethernet models or on the 12-port or higher 10 Gigabit Ethernet models.
The C3850-NM-8x10G and C3850-NM-2x40G modules are supported on the 24-port and 48-port multigigabit switches and also on the 24-port 10G SFP+ switch model.
The C3850-NM-4-1G and C3850-NM-2-10G modules are not supported on the 12-port and 24-port SFP+ models.
Could you explain this .
We have to purchase WS-C3850-24S and
C3850-NM-4-10G 4 x Gigabit Ethernet/4 x 10 Gigabit Ethernet network modules to reach
24 X 1 SFP Gigabit Ethernet with 4 x 10 Gigabit Ethernet port
Please suggest.
Regards
Debabrata
07-28-2016 05:26 AM
Debabrata,
In that case, WS-C3850-24XS will be compatible with the C3850-NM-4-10G.
07-28-2016 05:43 AM
Hi Leo
Can we use this 24 X 10 GE SFP+ as 24 X 1 GE port SFP ?
Regards
Debarata
07-28-2016 06:08 AM
Can we use this 24 X 10 GE SFP+ as 24 X 1 GE port SFP ?
Yes. WS-C3850-24XS can support SFP (Cisco Gigabit Ethernet Transceiver Modules Compatibility Matrix).
07-28-2016 06:31 AM
HI Leo
Port Type | Transceiver Module Name | |
WS-X45-SUP6-E |
X2 | |
WS-C3850-24XS-S |
SPF + |
07-28-2016 01:50 PM
SFP-10G-SR for the 3850.
07-29-2016 08:08 AM
Hi Leo
Can we use
X2-10GB-SR for WS-X45-SUP6-E
07-29-2016 04:35 PM
Can we use X2-10GB-SR for WS-X45-SUP6-E
X2 optics are supported.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide