Switch WS-C2960+24TC-L not recognized by CNA

[danfoss-sk]

Switch WS-C2960+24TC-L not recognized by Cisco network assistant. Switch is running on IOS 15.0(2)SE5, CNA 5.8(8.9). CNA show switch as wireless klient.
I tried upgrade but not help.

[Sebastian Helmer]

I gues u need a new version of CNA..

It's not the same, but I would give it a try..

pls. rate if helpful

These caveats were resolved in Network Assistant 5.8.9.1:

• CSCum09576

The Front Panel view of a Catalyst 2960X switch displays incorrect device name.

[danfoss-sk]

Thanks for reply, but not helps,

 

[Mark Malone]

Yes 6.1 supports it , 5.8 does not

http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_network_assistant/version6/relnotes/ol32368.html

With Cisco Network Assistant 6.0, you can manage these devices:

• Catalyst 2960-Plus switches

– WS-C2960+24PC-L

– WS-C2960+24LC-L

– WS-C2960+48TC-L

– WS-C2960+24TC-L

– WS-C2960+48PST-S

[amator007]

You have an old CNA version. Install version 6.1 - it support WS-C2960.