switching port problem

[muraripadhan]

Dears in cisco l3 switch

Its running fine but after 30 minutes or 1 hour uplink port or those port are connected to device its show orange colour and its not working 

So what is the problem

and i have checked vtp status on that 

Switch#show vtp status

Switch1#show vtp status
VTP Version                     : 2
Configuration Revision          : 0
Maximum VLANs supported locally : 1005
Number of existing VLANs        : 9
VTP Operating Mode              : Transparent
VTP Domain Name                 : nrdm
VTP Pruning Mode                : Disabled
VTP V2 Mode                     : Disabled
VTP Traps Generation            : Disabled

[Leo Laohoo]

Post the complete output to the command "sh interface status err".

[Julio E. Moisa]

Hi,

Please provide the following outputs:

show ip interface brief

show int status

Thank you