Hello -
Trying to add a 6708 10G-3C blade to an existing 6509-E chassis with 6509-E-FAN, but I am getting the below error message. My understanding is that the fan is supposed to automatically recognize the 67xx blade that requires 84 cfm and move from restricted power mode to high power but that didn't happen (chassis is limited to 70 cfm per slot currently). We've re-seated the fan and reloaded the switch - still no luck. Is this a power supply issue (currently running dual 2500W)? We ran the power calculator and didn't see any issues.
Thoughts/suggestions? Thanks.
~Mike
2003 Dec 16 21:32:53 %SYS-2-FAN_INSUFFICIENTCOOLING: Module 1 cannot be adequately cooled
2003 Dec 16 21:32:53 %SYS-5-MOD_PWRDENY: Power denied to module 1
2003 Dec 16 21:32:53 %SYS-5-MOD_INSERT: Module 1 has been inserted
Here are the environment information:
Environmental Status (. = Pass, F = Fail, U = Unknown, N = Not Present)
PS1: . PS2: . PS1 Fan: . PS2 Fan: .
Chassis-Ser-EEPROM: . Fan1: .
Clock(A/B): A Clock A: . Clock B: .
VTT1: . VTT2: . VTT3: .
Intake Exhaust Device 1 Device 2
Slot Temperature Temperature Temperature Temperature
--------------- --------------- --------------- --------------- ---------------
3 23C(50C,65C) 31C(85C,100C) N/A N/A
5 20C(45C,60C) 25C(50C,65C) 29C(55C,70C) 29C(55C,70C)
6 20C(45C,60C) 25C(50C,65C) 27C(55C,70C) 28C(55C,70C)
7 25C(45C,60C) 25C(55C,70C) N/A N/A
9 24C(45C,60C) 26C(55C,70C) N/A N/A
5 (Switch-Eng) 21C(45C,60C) 32C(60C,75C)
5 (MSFC) 24C(50C,65C) 24C(50C,65C)
6 (Switch-Eng) 21C(45C,60C) 30C(60C,75C)
6 (MSFC) 23C(50C,65C) 23C(50C,65C)
7 (VDB) 23C(75C,90C) 25C(70C,85C) 25C(75C,90C) N/A
9 (VDB) 24C(75C,90C) 25C(70C,85C) 25C(75C,90C) N/A
Chassis Modules
---------------------
VTT1: 28C(100C,115C)
VTT2: 29C(100C,115C)
VTT3: 36C(100C,115C)
PS1 WS-CAC-2500W AC with 1 input(s) and 2 output mode(s)
Capacity :
Mode1 : 1153.32 Watts ( 27.46 Amps @42V)
Mode2 [operational] : 2331.00 Watts ( 55.50 Amps @42V)
Capabilities
Floating power : No
Remote reset : No
Input configuration : No
Status
Online : Yes
Used : Yes
Output status : Ok
PS : Ok
PS Fan : Ok
IVM mode : High AC
PS2 WS-CAC-2500W AC with 1 input(s) and 2 output mode(s)
Capacity :
Mode1 : 1153.32 Watts ( 27.46 Amps @42V)
Mode2 [operational] : 2331.00 Watts ( 55.50 Amps @42V)
Capabilities
Floating power : No
Remote reset : No
Input configuration : No
Status
Online : Yes
Used : Yes
Output status : Ok
PS : Ok
PS Fan : Ok
IVM mode : High AC
PS Configuration : PS1 and PS2 in Redundant Configuration.
Total Power Available : 2331.00 Watts ( 55.50 Amps @42V)
Total Power Chassis Limit : 14700.00 Watts (350.00 Amps @42V)
Total Power Chassis Recommended : 14700.00 Watts (350.00 Amps @42V)
Total Power Available for Line Card Usage : 2331.00 Watts ( 55.50 Amps @42V)
Total Power Drawn From the System : 1157.52 Watts ( 27.56 Amps @42V)
Total Power Drawn by the Chassis : 0.00 Watt
Total Power Drawn by the modules : 997.92 Watts ( 23.76 Amps @42V)
Total Inline Power Drawn From the System : 88.50 Watts ( 2.11 Amps @42V)
Total Power Reserved as localpool for modules: 71.40 Watts ( 1.70 Amps @42V)
Remaining Power in the System : 1173.48 Watts ( 27.94 Amps @42V)
Configured Default Inline Power per port : 15.40 Watts ( 0.37 Amps @42V)
Slot power Requirement/Usage :
Slot Model Power Requested Power Allocated CardStatus
Watts A @42V Watts A @42V
---- ----------------------- -------- ------ -------- ------ ----------
1 Unknown 375.06 8.93 0.00 0.00 power-deny
3 WS-X6516-GBIC 142.80 3.40 142.80 3.40 ok
5 WS-SUP720-BASE 315.00 7.50 315.00 7.50 ok
6 WS-SUP720-BASE 315.00 7.50 315.00 7.50 standby
7 WS-X6148A-GE-45AF 112.56 2.68 112.56 2.68 ok
9 WS-X6148A-GE-45AF 112.56 2.68 112.56 2.68 ok
Slot Inline Power Requirement/Usage :
Slot Sub-Model Total Allocated Max H/W Supported Max H/W Supported
To Module (Watts) Per Module (Watts) Per Port (Watts)
---- ------------------- ----------------- ------------------ -----------------
7 WS-F6K-48-AF 17.701 850.08 15.400
9 WS-F6K-48-AF 70.804 850.08 15.400
Chassis per slot cooling capacity : 70 cfm
Fan tray(s) cooling capacity :
Fan Model Ver Cooling Ambient FanStatus
capacity temp
---- ------------------- --- -------- ------- ---------
1 WS-C6509-E-FAN 2 630 cfm 55C ok
Slot cooling requirement :
Slot CardType Cooling
---- ------------------- -------
1 Unknown 84 cfm
3 WS-X6516-GBIC 30 cfm
5 WS-SUP720-BASE 35 cfm
6 WS-SUP720-BASE 35 cfm
7 WS-X6148A-GE-45AF 35 cfm
9 WS-X6148A-GE-45AF 35 cfm
Chassis connector rating : 1260.00 Watts ( 30.00 Amps @42V)
Slot connector rating :
Slot CardType ConnectorRating
Watts A @42V
---- ------------------- -------- ------
1 Unknown 2016.00 48.00
3 WS-X6516-GBIC 1260.00 30.00
5 WS-SUP720-BASE 1260.00 30.00
6 WS-SUP720-BASE 1260.00 30.00
7 WS-X6148A-GE-45AF 1092.00 26.00
9 WS-X6148A-GE-45AF 1092.00 26.00
