Syslog Server Question?

Carlton Patterson · ‎12-24-2012

Hello Experts,

Can someone please tell me why the syslog server in my lab will only recieve alerts from Orangutan and Drill?

I can't get the syslog server to receive alerts or syslog messages from Gibbon or Chimpanzee.

Please configs and attached topology

Cheers

cadet alain · ‎12-24-2012

Hi,

If you do a trceroute to udp 514 from chimpanze and Gibbon , what output do you get ?

Regards.

Alain

Don't forget to rate helpful posts.

Carlton Patterson · ‎12-24-2012

Hi cadet,

I hope you're well.

I'm not sure how to do a traceroute to udp 514.

However, does the following configuration from my syslog server help?

Ethernet adapter Local Area Connection 2:

   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft Loopback Adapter
   Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::bcf2:805d:59aa:2b65%16(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.1.1(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.1.2
   DHCPv6 IAID . . . . . . . . . . . : 268566604
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-15-66-DE-C4-BC-AE-C5-E1-B0-15

   DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
                                       fec0:0:0:ffff::2%1
                                       fec0:0:0:ffff::3%1
   NetBIOS over Tcpip. . . . . . . . : Enabled

The default gateway 192.168.1.2 is the connection to Gibbon

The route print is as follows:
C:\Users\User>route print
===========================================================================
Interface List
16...02 00 4c 4f 4f 50 ......Microsoft Loopback Adapter
1...........................Software Loopback Interface 1
13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface
17...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #4
18...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #6
===========================================================================

IPv4 Route Table
===========================================================================
Active Routes:
Network Destination        Netmask          Gateway       Interface Metric
          0.0.0.0          0.0.0.0      192.168.1.2      192.168.1.1    286
        127.0.0.0        255.0.0.0         On-link         127.0.0.1    306
        127.0.0.1 255.255.255.255         On-link         127.0.0.1    306
127.255.255.255 255.255.255.255         On-link         127.0.0.1    306
      192.168.1.0    255.255.255.0         On-link       192.168.1.1    286
      192.168.1.1 255.255.255.255         On-link       192.168.1.1    286
    192.168.1.255 255.255.255.255         On-link       192.168.1.1    286
        224.0.0.0        240.0.0.0         On-link         127.0.0.1    306
        224.0.0.0        240.0.0.0         On-link       192.168.1.1    286
255.255.255.255 255.255.255.255         On-link         127.0.0.1    306
255.255.255.255 255.255.255.255         On-link       192.168.1.1    286
===========================================================================
Persistent Routes:
Network Address          Netmask Gateway Address Metric
          0.0.0.0          0.0.0.0      192.168.1.2 Default
===========================================================================

IPv6 Route Table
===========================================================================
Active Routes:
If Metric Network Destination      Gateway
1    306 ::1/128                  On-link
16    286 fe80::/64                On-link
16    286 fe80::bcf2:805d:59aa:2b65/128
                                    On-link
1    306 ff00::/8                 On-link
16    286 ff00::/8                 On-link
===========================================================================
Persistent Routes:
None

I look forward to your response

Cheers