cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
429
Views
0
Helpful
1
Replies

telnet only works when there are two sessions?

Rich Mauger
Level 1
Level 1

We have several 3750X switch stacks that have suddenly started requiring two active telnet sessions to do anything with the stack. Very simple example, but applies to all aspects of switch administration:

Session 1 - issue "sh int statu" command (carriage returns and output stops)

Session 2 - issue same "sh int statu" command (carriage returns and output stops and session 1 now shows the output from the session 1 initial command)

This makes switch administration a real challenge. No config changes to the stack(s), just started happening one day...

 

Model#  WS-C3750X-48PF-L

SW Image: c3750e-universalk9-mz.150-2.SE5.bin

H/W Version: 3

 

1 Accepted Solution

Accepted Solutions

Reza Sharifi
Hall of Fame
Hall of Fame

You are are probably encountering a bug in the version of IOS you are running.

Open a ticket with TAC.  They probably recommend an upgrade.

HTH

View solution in original post

1 Reply 1

Reza Sharifi
Hall of Fame
Hall of Fame

You are are probably encountering a bug in the version of IOS you are running.

Open a ticket with TAC.  They probably recommend an upgrade.

HTH