Dear Gents ,
I have switch cisco 3560-48ps not read the temperature also i did upgrade it to latest version recommend "c3560-ipbasek9-mz.122-55.SE11.bin"
but same problem and same log , please see the log :
TF-CCTV-CiscoSW#show env all
FAN is OK
TEMPERATURE is OK
SW PID Serial# Status Sys Pwr PoE Pwr Watts
-- ------------------ ---------- --------------- ------- ------- -----
1 Built-in Good
SW Status RPS Name RPS Serial# RPS Port#
-- ------------- ---------------- ----------- ---------
1 Not Present <>
TF-CCTV-CiscoSW#show env temperature
TEMPERATURE is OK
TF-CCTV-CiscoSW#show env temperatur status
Temperature Value: Not Supported
Temperature State: Not Supported
I appreciate your help .
