cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
378
Views
0
Helpful
2
Replies

Test Multicast routing with 1801

ealtun
Beginner
Beginner

hi,

I would like test multicast routing with cisco1801.

i create 2 Vlan. Vlan 200 (192.168.200.x) affect Fastethernet 1, Vlan 130 (192.168.130.x) Fastethernet 5.

Version IOS is : adipservice-k9 124-9.t1

  1. ip multicast-routing

#int Vlan 130

ip address 192.168.130.254 255.255.255.0

Ip pim dense-mode

#int Vlan 200

Ip address 192.168.200.254 255.255.255.0

Ip pim dense-mode

I used VLC for my test.

When i connect source (224.10.10.10) and recever ( Udp://@224.10.10.10:1234), that's ok!

But, source is on the Vlan 200 and reicever on the Vlan 130, is not good!

I test with "sparse-mode", i have same problem.

Tank you for help!

2 Replies 2

John Blakley
Advisor
Advisor

What do you mean it's "not good?" What is it doing or not doing? Is it that the quality is bad or does it not work at all?

HTH, John *** Please rate all useful posts ***

ealtun
Beginner
Beginner

It not work at all!

I think the problem it s VLC.

You know another software like VLC ?

Thank you

Sent from Cisco Technical Support iPhone App

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: