04-30-2012 01:24 AM - edited 03-07-2019 06:24 AM
hi,
I would like test multicast routing with cisco1801.
i create 2 Vlan. Vlan 200 (192.168.200.x) affect Fastethernet 1, Vlan 130 (192.168.130.x) Fastethernet 5.
Version IOS is : adipservice-k9 124-9.t1
ip multicast-routing
#int Vlan 130
ip address 192.168.130.254 255.255.255.0
Ip pim dense-mode
#int Vlan 200
Ip address 192.168.200.254 255.255.255.0
Ip pim dense-mode
I used VLC for my test.
When i connect source (224.10.10.10) and recever ( Udp://@224.10.10.10:1234), that's ok!
But, source is on the Vlan 200 and reicever on the Vlan 130, is not good!
I test with "sparse-mode", i have same problem.
Tank you for help!
04-30-2012 04:56 AM
What do you mean it's "not good?" What is it doing or not doing? Is it that the quality is bad or does it not work at all?
05-01-2012 12:09 AM
It not work at all!
I think the problem it s VLC.
You know another software like VLC ?
Thank you
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide