12-19-2012 06:57 PM - edited 03-07-2019 10:42 AM
Hey im new to cisco (taking course for CCNA certf.) and i bought a cisco 2950 series switch to play around with and im trying to set it up to SSH. I have google'd a bit on how to do this and i've sort of hit a wall... i have downloaded the cryptographic image from cisco's website, installed a TFTP server (think this is where my issue lies) but when i do the copy tftp flash global command i keep getting the error accessing "xxxx" message.
I have tried allowing the server through windows firewall, disabling windows firewall, allowing access through the router... and still no luck.
Please help!
Thanks in advance!
J
12-19-2012 07:12 PM
Can you post the error message please?
What TFTP proggie are you using?
12-19-2012 07:20 PM
%error opening tftp://192.168.1.120/c2950-i6k212q4-mz.121-22.EA14.bin (timed out)
The TFTP is solar winds (also tried using winagent tftp server)
The switch i have is a cisco 2950 serier 12.ver 12.1(19)EA1c
12-19-2012 07:22 PM
Timed out means the switch managmenet VLAN IP address cannot reach your TFTP server.
What's the config of the switch?
12-19-2012 07:32 PM
what do you mean? (not sure what your looking for?)
12-19-2012 07:41 PM
Hi,
Refer this link
Hope it will help
12-20-2012 03:06 AM
can you give details of sh flash command........may be u r giving wrong path for source filename.....
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide