Tracking IP SLA

[paolo.acquaviva]

Hello,

I have a question about the "track" command. I found a router's configuration in which there is the command "track 1 ip sla 10" without the optional word (status| reachability).  In this case what is the return code? When I use this tracking to decrement the HSRP priority will it work?

Thank you very much.

Best regards.

Paolo

[Abzal · Accepted solution]

Hi,

That should be OK.

https://learningnetwork.cisco.com/thread/36909

http://www.cisco.com/en/US/docs/ios/ipsla/command/reference/sla_05.html#wp1093733

Verification:

sh track 1

sh ip sla monitor stat

Hope it will help.

Best regards,
Abzal

[jawad-mukhtar · Accepted solution]

Yes u can use IP SLA Track to Decrement HSRP Value

E.g.

Lint Vlan 1

ip Addess 192.168.1.2 255.255.255.0

Standby 10 ip address 192.168.1.1

Standby 10 priority 110

Standby 10 track 10 (ip sla 10 that u will created to track specific IP) decrement 10

In that case IF TRACK 10 goes down its Standby 10 priority will be decrement to 100

Regards...