10-04-2017 01:24 AM - edited 03-08-2019 12:15 PM
Hi All,
I am using Cisco 2960X-48FPS-L switch running with IOS image "C2960X-UNIVERSALK9-M" version "15.2(2)E6" and using IP Services license to enable L3 features.
We have two Routers connected to this switch using Redundant uplinks for High availability, using one Router as Primary and second Router as backup by creating Floating Static Routes in Cisco 2960, to route traffic on Destinations connected to Routers.
We would like to track the availability of destination Network's on Static Routes created in Cisco 2960 switch, for auto failovers.
Could you please help me, on possibilities to track the Static routes in Cisco 2960 switch for auto failovers and find the attached, for existing toplogy we are using.
Thanks,
Chaitanya Krishna.
Solved! Go to Solution.
10-04-2017 03:49 AM
10-04-2017 01:33 AM
Hi
Is ip sla feature available on that image on the 2960x you could track using that if its supported
(config)#ip sla ?
<1-2147483647> Entry Number
enable Enable Event Notifications
endpoint-list Endpoint list configuration
ethernet-monitor IP SLAs Auto Ethernet Configuration
group Group Configuration or Group Scheduling
key-chain Use MD5 Authentication for IP SLAs Control Messages
logging Enable Syslog
low-memory Configure Low Water Memory Mark
reaction-configuration IP SLAs Reaction-Configuration
reaction-trigger IP SLAs Trigger Assignment
reset IP SLAs Reset
responder Enable IP SLAs Responder
restart Restart An Active Entry
schedule Entry Scheduling
server IPPM server configuration
Examples
ISP Failover with Default Routes using IP SLA Tracking
http://www.ciscozine.com/using-ip-sla-to-change-routing/
10-04-2017 03:41 AM
Hi Mark,
Sorry, i am not able to see all the commands under "ip sla ?" as listed in your reply.
I am able to see only below commands in my switch,
switch(config)# ip sla ?
key-chain Use MD5 Authentication for IP SLAs Control Messages
responder Enable IP SLAs Responder
The using "ip base" license on this switch.
Please let me the possibilities to acheive this requirement.
10-04-2017 03:49 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide