cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
770
Views
0
Helpful
3
Replies

Traffic behavior on 3750

greycrx87
Level 1
Level 1

Please see the attached for diagram.

My issue is that when we perform an IPerf test between two servers, somehow the traffic traverses via the firewall LAN interface ( I see the traffic on the firewall LAN interface spiking during the test)

Why isn't it that the two servers are talking to each other directly local on the switch versus going via the firewall gateway.

Am I missing anything?

3 Replies 3

aljaloudi
Level 1
Level 1

Yes, - It is based on S.MAC and D.MAC of two servers (layer 2)  such that if server 1 want to communicate with server 2, it send  ARP request for the MAC address of server 2  then the server 2 will receive the ARP request and respond to it, and then both servers will communicate directly without going to Gateway.

stephenshaw
Level 1
Level 1

Not sure if the firewall has proxy arp enabled for that LAN??

The drop-in configuration mode (using proxy arp in Watchguard terms) is not checked as an option on the firewall.

So what does this mean? Help me understand it.

http://www.watchguard.com/help/lss/74/UsingProxyARPToSetIPAddresses.htm

Review Cisco Networking for a $25 gift card