Transceivers compabilty matrix for the 2960-L switches

[Konstantin_Soloviov]

Hello,

Where I can find the transceivers compability list for 2960-L switches?

Datasheet says " For information about supported SFP/SFP+ modules, refer to the Transceiver Compatibility matrix tables at cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html"

But there is not information about 2960-L switches in this document - http://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modules/compatibility/matrix/GE_Tx_Matrix.html

[Leo Laohoo]

Plain 2960 doesn't support SFP+ so the list of supported SFP modules can be found HERE.

Please do not forget to rate our useful posts.  

[Konstantin_Soloviov]

I can`t find models like WS-C2960L-24TS-LL in this document. Sorry.

I assume that in L-models can be installed same SFP as in legacy 2960, but I need official announcement.

[Leo Laohoo · Accepted solution]

2960-L was just released January 2017.  The documentation for this new model hasn't "caught up" with anyone else yet. 

If this information is highly important, then contact your nearest Cisco AM/SE and they should be able to share confidential information with you.