01-22-2019 09:13 AM - edited 03-08-2019 05:06 PM
Hello. I am currently using two cisco Integrated Services Routers to set up communication between two networks. I was unable to push any traffic through the FE 1/1-7 ports so I put a static ip on my fa 0/1. I plug a dummy switch into the 0/1 on ISR 1 and I can ping the transport on ISR 2 from one of the hosts on that dummy switch. I have setup a trunk from 0/4 on the router to 1/8 on the switch. My sh commands confirm that the trunk is up. I ran cdp. Still no traffic. I cannot even ping the 0/0 from the 1/1.
01-22-2019 10:09 AM
What type of Cisco device is this and what is the part number for the module that is installed?
Also, what version of IOS are you running?
HTH
01-22-2019 07:06 PM
The M3-SE3 which contains a Cisco® 5915 Embedded Services Router (ESR) and ESS 2020 switch cisco version 15.2.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: