Hi all,
I have configured trunk between 6509 and HP C-Class blade server which has two CBS3020 switches. On both the switches I see input and crc errors but no errors on 6509 ports:
5 minute input rate 70000 bits/sec, 69 packets/sec
5 minute output rate 25000 bits/sec, 18 packets/sec
892571 packets input, 144021048 bytes, 0 no buffer
Received 321702 broadcasts (0 multicast)
0 runts, 0 giants, 0 throttles
945 input errors, 945 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 283338 multicast, 0 pause input
0 input packets with dribble condition detected
436078 packets output, 61800268 bytes, 0 underruns
I have correct native vlans set and both ends set to full duplex.
Config on 3020 trunk interface:
interface GigabitEthernet0/24
switchport trunk encapsulation dot1q
switchport mode trunk
switchport nonegotiate
duplex full
spanning-tree link-type point-to-point
Any ideas?
Thanks
SK