trunk between asa 5510 and aironet 1142 (standolone)

[Aurimas Vertelis]

Hi!

Connection schema is: asa5510 --> cisco switch SG200 --> 1142 aironet (standalone)

I did trunk port between devices

vlan 1 (on firewall is Etherenet 0/1)

vlan 100 (on firewall is Etherenet 0/3.100)

vlan 200(on firewall is Etherenet 0/3.200)

and vlans working, i have internet and i can reach company lan, but i can't reach bvi1 port for management!!

because bvi1 interface using untaged packets.

So how to solve that problem, make reachable bvi1 interface from lan?

[Antonio Knox]

Assign the BVI an address on the native vlan of the trunk between the ASA and 1142.  That traffic would then traverse the trunk untagged by default and should work.

[Aurimas Vertelis]

i changed bvi1 IP to native vlan ip, but no luck

[Aurimas Vertelis]

Solved!!!

on switch was 1vlan taged, i did untag 1vlan packets

[Antonio Knox]

If my post was helpful, please rate.  Thanks, and glad your issue was resolved.