Hi Guys,
I have tried connecting 2 switch using a trunk port in able for VLAN to run on 2950 switch, 2950 and 2960G, but the problem is, it keeps going up and down when I check the logs. The client experienced intermittent network connection by this problem. What seems to be the problem here? I already replaced the cables.
Here is the config:
They are connected via cross-cable
2950:
Int f0/24 --> 100mbps port
switchport mode trunk
2960G:
Int G0/1 --> 1Gbps port
switchport mode trunk
*I believe they will auto negotiate their current speed and duplex.
Thanks in advance.
Cheers!
