01-21-2021 02:04 AM
Hello everyone;
Iam asking could I configure trunk port between X4500 switch and huawei S5720 switch
01-21-2021 02:10 AM - edited 01-21-2021 02:11 AM
Cat 4500 can be trunk with Huawei as below example : test and advice.
interface Eth-Trunk22
port link-type trunk
stp bpdu-filter enable
stp edged-port disable
mode lacp
interface GigabitEthernet x/x
undo negotiation auto
eth-trunk 22
Cisco 45 00 switch config:
interface Port-channel 22
switchport mode trunk
interface GigabitEthernet x/x
switchport mode trunk
channel-group 22 mode passive
01-21-2021 03:39 AM
Hello,
the below should work.
Huawei S5720
interface GigabitEthernet 0/0/11
port link-type trunk
port trunk allow-pass vlan all
quit
Cisco
interface GigabitEthernet0/1
switchport mode trunk
--> switchport trunk encapsulation dot1q --> optional depending on your model
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide