06-22-2021 04:00 AM
If UDLD is enabled under fiber ports, if loop accurs/detected with one of fiber link in EtherChannel, would the whole EtherChannel will go down/error-disbaled or would only down the specific port will go down in EtherChannel ?
Solved! Go to Solution.
06-22-2021 04:37 AM
Hello,
Only the affected physical port should go down, not the entire EtherChannel. After all, UDLD can be enabled only on individual physical member interfaces of an EtherChannel - there are no UDLD commands available on the Port-Channel interfaces, anyway.
Best regards,
Peter
06-22-2021 04:37 AM
Hello,
Only the affected physical port should go down, not the entire EtherChannel. After all, UDLD can be enabled only on individual physical member interfaces of an EtherChannel - there are no UDLD commands available on the Port-Channel interfaces, anyway.
Best regards,
Peter
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide