02-24-2005 08:38 AM - edited 03-05-2019 11:27 AM
Hi,
I am using 3745 router, When i debug anything lets say debug crypto isakmp it doesn't show me notifications on the screen,
Till 2 months back it was happening perfectly fine..
All of sudden it stopped.
Any help will be appreciated on the urgent basis.
Thanks,
02-24-2005 08:45 AM
Hi,
If your telneting to the device try the following
logging monitor debugging
terminal monitor
I gather your device is actually logging somewhere but not to the console
Examining the first few lines of "show logging" will show you how your router is currently set up to log.
e,g,
Console logging: level debugging, 3869 messages logged
Monitor logging: level debugging, 0 messages logged
Buffer logging: level debugging, 39 messages logged
Exception Logging: size (4096 bytes)
File logging: disabled
Trap logging: level informational, 3893 message lines logged
Logging to 192.168.70.21, 310 message lines logged
HTH
Paddy
02-24-2005 08:47 AM
PS, if you have a console connection to the device you need to make sure logging is on (logging on) and logging to the console is set to debugging (logging console debugging)
Good luck!
03-02-2005 07:08 AM
I take it you've got ISAKMP turned on?
crypto isakmp enable
It's another explaination of no debug messages...
03-03-2005 11:11 AM
Hi,
Thanks for your kind help i am able to get the notifications now..
Thanks
Irshad
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide