Please find the requested output
#sh boot
---------------------------
Switch 1
---------------------------
Current Boot Variables:
BOOT variable does not exist
Boot Variables on next reload:
BOOT variable = flash:packages.conf
Manual Boot = no
Enable Break = no
Boot Mode= DEVICE
iPXE Timeout= 0
Switch# sh ver
Cisco IOS Software [Denali], Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 16.3.7, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Fri 03-Aug-18 23:49 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2018 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
BOOTLDR: CAT3K_CAA Boot Loader (CAT3K_CAA-HBOOT-M) Version 3.56, RELEASE SOFTWARE (P)
CCN07 uptime is 1 year, 50 weeks, 3 days, 20 hours, 41 minutes
Uptime for this control processor is 1 year, 50 weeks, 3 days, 20 hours, 46 minutes
System returned to ROM by reload
System restarted at 12:16:20 EDT Wed Apr 17 2019
System image file is "flash:packages.conf"
Last reload reason: Reload command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Technology Package License Information:
-----------------------------------------------------------------
Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
lanbasek9 Permanent lanbasek9
cisco WS-C3650-48PD (MIPS) processor (revision Q0) with 865683K/6147K bytes of memory.
Processor board ID
1 Virtual Ethernet interface
200 Gigabit Ethernet interfaces
8 Ten Gigabit Ethernet interfaces
2048K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
250456K bytes of Crash Files at crashinfo:.
250456K bytes of Crash Files at crashinfo-2:.
252000K bytes of Crash Files at crashinfo-3:.
250456K bytes of Crash Files at crashinfo-4:.
1609272K bytes of Flash at flash:.
1609272K bytes of Flash at flash-2:.
1611414K bytes of Flash at flash-3:.
1609272K bytes of Flash at flash-4:.
0K bytes of at webui:.
252000K bytes of Crash Files at crashinfo-5:.
1611414K bytes of Flash at flash-5:.
Base Ethernet MAC Address :
Motherboard Assembly Number : 73-15897-06
Motherboard Serial Number :
Model Revision Number : Q0
Motherboard Revision Number : A0
Model Number : WS-C3650-48PD
System Serial Number :
Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 52 WS-C3650-48PD 16.3.7 CAT3K_CAA-UNIVERSALK9 INSTALL
2 52 WS-C3650-48PD 16.3.7 CAT3K_CAA-UNIVERSALK9 INSTALL
3 52 WS-C3650-48PD 16.3.7 CAT3K_CAA-UNIVERSALK9 INSTALL
4 52 WS-C3650-48PD 16.3.7 CAT3K_CAA-UNIVERSALK9 INSTALL
Switch 02
---------
Switch uptime : 1 year, 50 weeks, 3 days, 21 hours, 22 minutes
Base Ethernet MAC Address :
Motherboard Assembly Number : 73-15897-06
Motherboard Serial Number :
Model Revision Number : Q0
Motherboard Revision Number : A0
Model Number : WS-C3650-48PD
System Serial Number :
Switch 03
---------
Switch uptime : 1 year, 50 weeks, 3 days, 20 hours, 46 minutes
Base Ethernet MAC Address :
Motherboard Assembly Number : 73-15897-06
Motherboard Serial Number :
Model Revision Number : Q0
Motherboard Revision Number : A0
Model Number : WS-C3650-48PD
System Serial Number :
Switch 04
---------
Switch uptime : 1 year, 50 weeks, 3 days, 20 hours, 46 minutes
Base Ethernet MAC Address :
Motherboard Assembly Number : 73-15897-06
Motherboard Serial Number :
Model Revision Number : Q0
Motherboard Revision Number : A0
Model Number : WS-C3650-48PD
System Serial Number :
Configuration register is 0x102
Switch#more flash:packages.conf
#! /usr/binos/bin/packages_conf.sh
sha1sum: fc0ffb353e67116802fef062e4a67903e00e378f
# sha1sum above - used to verify that this file is not corrupted.
#
# package.conf: provisioned software file for build 2018-08-04_01.05
#
# NOTE: Editing this file by hand is not recommended. It is generated
# as part of the build process, and is subject to boot-time
# consistency checks. Automatically-produced package files are
# guaranteed to pass those checks. Manually-maintained ones are
# not. Because "nfs" and "mount" directives are processed first,
# regardless of their position in the file, the recommended
# approach is to keep a separate file containing JUST your
# personal "nfs" and "mount" directives, and to append it to the
# automatically-generated file.
#
# Note further that when SHA-1 checksum verification is enabled,
# you will NOT be able to alter this file without updating the
# SHA-1 sum.
#
# This file can contain three types of entries:
#
#
# NFS directives (optional)
# notes: NFS directives are processed before all others (mount, iso).
# Multiple NFS directives may appear so long as they do not
# conflict -- that is, specify the same source or mountpoint.
# syntax: nfs <IP ADDRESS>:<REMOTE_PATH> <LOCAL_MOUNTPOINT>
# example: nfs 127.0.0.1:/auto/some/nfs/path /auto/some/nfs/path
#
#
# mount directives (optional)
# notes: mount directives are processed after 'nfs' and before 'iso'.
# One mount directive may appear for each F/S/B/P tuple
# syntax: mount FRU SLOT BAY PACKAGE_NAME LINUX_PATH
# example: mount rp 0 0 rp_base /auto/some/nfs/path/abs_soft/rp_base.ppc
#
# The specified LINUX_PATH may be local [sata disk] or
# reference the NFS mounts since they are processed first.
#
# Mount directives cause the package-specific mount link to
# be set to the specified path instead of to the mountpoint
# in sw for the corresponding ISO.
#
#
# iso directives (mandatory)
# notes: iso directives are processed last: any package for which
# a 'mount' directive does not appear will be mounted.
# One iso directive may appear for each F/S/B/P tuple.
# syntax: iso FRU SLOT BAY PACKAGE_NAME PACKAGE_FILE.bin
# example: iso rp 0 0 rp_base rp_base.ppc.bin
#
# PACKAGE_FILE.bin is a path relative to the packages.conf
# file. Although it supports sub-directories for development
# purposes, in deployment the files will always be managed
# as in the same directory as packages.conf so as to
# guarantee that name collisions cannot occur.
#
# Note that the RP 0/1 distinction is a convenience for development
# and testing as it allows us to have a packages.conf describe a
# SW load that varies depending on whether the RP finds itself in
# slot 0 or 1.
#
# The ISSU process *must* update *both* RP slots simultaneously so that
# the RP will behave predictably whichever slot it finds itself on [e.g.,
# if package X is upgraded, and the RP is ejected and put into either
# slot of a new chassis, we expect to see the upgraded X without regard
# to slot].
#
iso rp 0 0 rp_base cat3k_caa-rpbase.16.03.07.SPA.pkg
iso rp 0 0 rp_core cat3k_caa-rpcore.16.03.07.SPA.pkg
iso rp 0 0 rp_daemons cat3k_caa-rpcore.16.03.07.SPA.pkg
iso rp 0 0 rp_iosd cat3k_caa-rpcore.16.03.07.SPA.pkg
iso rp 0 0 rp_wcm cat3k_caa-wcm.16.03.07.SPA.pkg
iso rp 0 0 rp_webui cat3k_caa-webui.16.03.07.SPA.pkg
iso rp 0 0 srdriver cat3k_caa-srdriver.16.03.07.SPA.pkg
iso rp 0 0 rp_security cat3k_caa-rpcore.16.03.07.SPA.pkg
iso rp 0 0 guestshell cat3k_caa-guestshell.16.03.07.SPA.pkg
iso fp 0 0 fp cat3k_caa-rpcore.16.03.07.SPA.pkg
#
# -start- superpackage .pkginfo
#
# pkginfo: Name: rp_super
# pkginfo: BuildTime:
# pkginfo: ReleaseDate: Sat-04-Aug-18-04:05
# pkginfo: .BuildArch: mips64
# pkginfo: BootArchitecture: mips
# pkginfo: .BootArch: mips
# pkginfo: RouteProcessor: edison
# pkginfo: Platform: CAT3K_CAA
# pkginfo: User: mcpre
# pkginfo: PackageName: universalk9
# pkginfo: Build: 16.03.07
# pkginfo: .SupportedBoards: edison
# pkginfo: .InstallModel:
# pkginfo: .PackageRole: rp_super
# pkginfo: .RestartRole: rp_super
# pkginfo: CardTypes:
# pkginfo: .CardTypes:
# pkginfo: .BuildPath: /auto/mcpbuilds31/release/16.03.07/BLD-V16_03_07_FC4/binos/linkfarm/stage-edison/hard/rp_super_universalk9.mips64
# pkginfo: .Version: 16.3.7.0.1936.1533369909..Denali
#
# -end- superpackage .pkginfo
#
#
I am planning to replace the current switches and then added the switch 5 to the new stack.
