03-29-2023 06:31 AM
Hi All,
We have Cisco C1000 Switch (IOS 15.2(7)E5) working as Core in our LAN infra. We have multiple vlans configured, interface vlans are configured on the same C1000 Switch.
We are facing strange issue, intermittently hosts connected to access network are unable to ping the other subnets apart from their own vlan (subnet) able to ping gateway as well.
When we check the show ip arp and show mac address table it shows proper mac entry and ip arp entry.
Once we issue "clear ip arp XXXX.XXXX.XXXX". it starts pinging in other subnets as well.
Or
If we add a static entry for ip and MAC, that also makes pinging in other subnets to work.
Kindly assist to find the issue and resolution.
Regards,
Aditya Deshmukh
03-29-2023 06:43 AM
Hi,
Anything in the switch logs that indicates a problem?
HTH
03-29-2023 06:46 AM
Hi,
Nothing all logs are clean.
03-30-2023 02:19 AM
If someone has configured a pc with the same ip as the gateway. Then when pinging the local subnet all is working. Also when ping the gateway works, because the rough pc answers. But when ping outside, the ping goes to the rough pc instead of the gateway. Look at the arp in the client and see if the gateway arp is changed when traffic interrupts.
03-30-2023 02:39 AM
are you config DHCP snooping with DAI ??
10-09-2023 09:23 PM
We have very similar issue. I believe it's a bug and should be resolved by going to 15.2(7)E7. Testing that now.
Did you every solve the issue?
06-17-2024 07:46 AM
Follow up to our issue. One other thing to consider is the SDM profile. It's really small for the C1000. I believe it's 512 total. So that means the sum of active hosts on your vlans can't be over 512 to be able to route to them. The 2960XR I believe was at least 4K. Another thing is it doesn't log anything either when it hits this limit. You just get random hosts that can't route off the local vlan they're on.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide