Understand output of "show ip route summary" command

[Christoph Neulinger]

Hello,

can anyone tell me what the "am" in the Output of the "sho ip route summary" command stands for?

Christoph

Example:

Router# sho ip route summary vrf all
 IP Route Table for VRF "xxx"
Total number of routes: 308
Total number of paths:  332

Best paths per protocol:      Backup paths per protocol:
  am             : 214          ospf-1000      : 10
  local          : 14   
  direct         : 14   
  broadcast      : 29   
  hsrp           : 10   
  ospf-1000      : 41 

[Peter Paluch]

Christoph,

What operating system is this? It does not look like an ordinary IOS - neither the syntax of the command, nor the output match the IOS style. Is that perhaps an XR or NX-OS?

Best regards,
Peter

[Christoph Neulinger]

Hi Peter,

it is NX-OS Version 6.2(14) on Nexus 7710.

Kind regards

Christoph

[Mark Malone · Accepted solution]

Think Its the fib adjacency manager routes

IP Route Table for VRF "default"
Total number of routes: 2120
Total number of paths:  2123

Best paths per protocol:      Backup paths per protocol:
  local          : 40           eigrp-1        : 2
  direct         : 40
  static         : 3
  broadcast      : 81
  am             : 994
  hsrp           : 37
  eigrp-1        : 926

Number of routes per mask-length:
  /0 : 1       /8 : 1       /16: 4       /18: 1       /21: 1
  /22: 42      /23: 56      /24: 301     /25: 23      /26: 19
  /27: 38      /28: 95      /29: 51      /30: 133     /32: 1354

xir-d116sds01#