07-07-2005 05:57 AM - edited 03-05-2019 11:34 AM
Hi,
I have a 2620XM with (obviously) one FastEthernet interface. However, I'd like to setup a bridging firewall and will need two FastEthernet interfaces for that. What is the best way to upgrade the router? Which module would be the best for coupling with the existing one for bridging purposes?
Thanks,
Andrey
07-08-2005 02:18 AM
Hi,
You need to look at a NM-1FE2W as Cisco have stopped making the NM-1FE dedicated modules.
This module requires 12.2(8)T as the minimum IOS version and 32 MB DRAM, the IOS also supports bridging
HTH
PJD
07-11-2005 09:00 AM
Rather than vesting on a network module worth 1500-2000 dollars, i would suggest trading in the Cisco 2620 and get a 2801 or 2811. It will come upto the same price..
07-13-2005 08:44 AM
Thanks guys. I'm going to try to get a NM-1FE. It looks like I can get it from eBay for $200. This is a low budget project.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide