i have a customer with 6500 that have following modules
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 6 Firewall Module WS-SVC-FWM-1 SAL1526GX94
2 8 CEF720 8 port 10GE with DFC WS-X6708-10GE SAL1528JGF2
3 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAL1527HXXM
4 8 CEF720 8 port 10GE with DFC WS-X6708-10GE SAL1528JGFT
5 5 Supervisor Engine 720 10GE (Active) VS-S720-10G SAL1527HQ28
7 1 Application Control Engine Module ACE20-MOD-K9 SAL15129HY2
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 e05f.b994.3568 to e05f.b994.356f 4.5 7.2(1) 4.1(12) Ok
2 c89c.1ddc.9268 to c89c.1ddc.926f 2.3 12.2(18r)S1 12.2(33)SXI6 Ok
3 c89c.1de3.70e8 to c89c.1de3.7117 4.1 12.2(18r)S1 12.2(33)SXI6 Ok
4 c89c.1ddc.9290 to c89c.1ddc.9297 2.3 12.2(18r)S1 12.2(33)SXI6 Ok
5 588d.098a.8a5c to 588d.098a.8a63 4.0 8.5(4) 12.2(33)SXI6 Ok
7 f866.f2b1.dfd8 to f866.f2b1.dfdf 2.6 8.7(0.22)ACE A2(3.1) Other
Mod Sub-Module Model Serial Hw Status
i need to upgarde to ipbase 15.1SY but im on 12.2(33)SXI6 , can i upgrade directly or i need to jump through other versions???
