03-16-2021 07:54 AM - edited 03-16-2021 07:55 AM
Hello,
I wanted to upgrade stacked WS-C3650-48PD from Version 03.06.04.E RELEASE SOFTWARE (fc2) to IOS XE Software- Fuji-16.9.6(MD).
I have noticed the difference in hardware version for the both switches V03 and V05.
#sh switch
Switch/Stack Mac Address : e00e.da1c.9480 - Local Mac Address
Mac persistency wait time: Indefinite
H/W Current
Switch# Role Mac Address Priority Version State
------------------------------------------------------------
*1 Active 14 V03 Ready
2 Standby 13 V05 Ready
Is it safe to upgrade the switches to the IOS XE Software- Fuji-16.9.6(MD).?
Thank you.
Regards,
Daniel
Solved! Go to Solution.
03-16-2021 04:09 PM - edited 03-16-2021 04:10 PM
Different hardware version is not an issue because you are going from 3.6.X to 16.X.X.
Had the situation been the reverse, from 16.X.X to 3.6.X, it would not be possible due to CSCva22409.
03-16-2021 08:00 AM
Hi there,
Different hardware revisions will not affect you making this upgrade.
cheers,
Seb.
03-16-2021 04:09 PM - edited 03-16-2021 04:10 PM
Different hardware version is not an issue because you are going from 3.6.X to 16.X.X.
Had the situation been the reverse, from 16.X.X to 3.6.X, it would not be possible due to CSCva22409.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide