cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3587
Views
15
Helpful
9
Replies

Upgraded c1000-8fp-2g-l Now Receiving 404 Not Found Error on WebUI

CiscoJGod
Level 1
Level 1

I recently upgraded three C1000-8FP-2G-L switches from 15.2(7)E4 to 15.2(7)E6. After the upgrade the webui was giving me the dreaded "404 not found" error. I've tried downgrading back to 15.2(7)E5, then 15.2(7)E4, then 15.2(7)E3 and none of the previous versions are working properly. 

 

Here are some pertinent configs that I've tried after reading some of the other posts similar to this:


username cisco privilege 15 password 0 cisco
no aaa new-model
switch 1 provision c1000-8fp-2g-l

 

ip http server
ip http banner
ip http authentication local
ip http secure-server


Really would appreciate the help with solving this mystery.

1 Accepted Solution

Accepted Solutions

Ok, we gonna do this "by the book".  

Do the following in CLI: 

delete /f /r flash:c1000-universalk9-mz.152-7.E*.bin
archive download-sw /leave flash:c1000-universalk9-tar.152-7.E5.tar

Once the 2nd command goes in, the switch may "freeze" for about 10 minutes.  Leave it alone.  It will unpack the IOS correctly and this process will take another 15 minutes (on top of the first 10 minutes).  

This 2nd command will also unpack all the HTML files for IOS version 15.2(7)E5 and leave the old version behind.  

Once the unpacking process completes, reboot the switch.

 

 

 

View solution in original post

9 Replies 9

Leo Laohoo
Hall of Fame
Hall of Fame

Post the complete output to the command "dir". 

I suspect someone performed the so-called "upgrade" by copying the BIN file.

I upgraded from the GUI originally via upload. Perhaps that's where I went wrong?

File gone now from uploadFile location:

 

Switch#dir flash:uploadFile
Directory of flash:/uploadFile/

No files in directory

244711424 bytes total (90439680 bytes free)

Ok, we gonna do this "by the book".  

Do the following in CLI: 

delete /f /r flash:c1000-universalk9-mz.152-7.E*.bin
archive download-sw /leave flash:c1000-universalk9-tar.152-7.E5.tar

Once the 2nd command goes in, the switch may "freeze" for about 10 minutes.  Leave it alone.  It will unpack the IOS correctly and this process will take another 15 minutes (on top of the first 10 minutes).  

This 2nd command will also unpack all the HTML files for IOS version 15.2(7)E5 and leave the old version behind.  

Once the unpacking process completes, reboot the switch.

 

 

 

It in progress just now. Will post back momentarily with an update. 

Absolutely Amazing! It worked!

Been wracking my brain for several hours trying to figure this out!

Thanks Leo!

My friend , you are a God walking amongst men. Thank you.

Thanks for the kind words but I don't really deserve such accolades. 

CiscoJGod
Level 1
Level 1


Directory of flash:/

1025 -rwx 4120 May 4 2022 22:45:36 +00:00 multiple-fs
260 -rwx 38522880 Oct 30 2021 21:48:12 +00:00 c1000-universalk9-tar.152-7.E4.tar
521 drwx 2048 Oct 30 2021 21:57:36 +00:00 dc_profile_dir
779 -rwx 52 Oct 30 2021 21:59:00 +00:00 express_setup.debug
769 drwx 2048 Oct 30 2021 22:00:58 +00:00 pnp-info
264 drwx 2048 Apr 29 2022 23:03:09 +00:00 c1000-universalk9-mz.152-7.E4
774 drwx 2048 May 4 2022 13:29:20 +00:00 uploadFile
771 drwx 2048 May 4 2022 21:46:27 +00:00 pnp-tech
1028 -rwx 38533120 May 4 2022 22:02:41 +00:00 c1000-universalk9-tar.152-7.E5.tar
1026 -rwx 16481280 May 4 2022 22:29:13 +00:00 c1000-universalk9-mz.152-7.E5.bin
1029 -rwx 16453632 May 4 2022 22:41:31 +00:00 c1000-universalk9-mz.152-7.E3.bin
1286 -rwx 1385 May 4 2022 22:44:38 +00:00 config.text
775 -rwx 3406 May 4 2022 22:44:38 +00:00 private-config.text
2 drwx 2048 Mar 1 1993 00:00:02 +00:00 lost+found

244711424 bytes total (90439680 bytes free)

Review Cisco Networking for a $25 gift card