03-04-2019 06:21 AM
Hi All
I need to upgrade some 3850-24XU-L switches, they hung the other day whereby they stopped forwarding traffic and all the lights were stuck on, I am guessing this is some kind of bug.
Last time I upgraded some 3850's they became unusable due to some bug.
The current IOS on the ones I want to upgrade is below
Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 38 WS-C3850-24XU 03.07.05.E cat3k_caa-universalk9 BUNDLE
2 38 WS-C3850-24XU 03.07.05.E cat3k_caa-universalk9 BUNDLE
What is the best most stable IOS version to put on these and also what is the best way to upgrade, via the boot system command or the software install command ?
Cheers
03-04-2019 06:29 AM
03-04-2019 06:51 AM
03-04-2019 08:19 AM
Hi Mark
Thanks for the message, at the moment the switch is in Bundle mode running 03.07.05E
So are you saying I need to re run the same software that is on it now, but install it using the software expand and then boot using the packages.conf file , So it this what converts it to Install mode?
Once I am on the newer versions then I can use the Bin file as normal?
cheers
03-04-2019 08:45 AM
03-05-2019 04:36 AM
Hi Mark
I will be looking to go to Everest 16.06.05, Can I do the .bin file upgrade to this from my current version?
cheers
03-05-2019 04:55 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide