hi guys and gals,
I am used to upgrading 3850's but not virtual cores and I came across the "ISSU" command. When I issue the "issu loadversion command", it returns the error "% Active Boot variable doesn't exist"
the registry is set to 0x2102 , i made sure the IOS is on both cores , "sh red" is below , what other prep work am I missing ...? thank you for any assistance ...!
Redundant System Information :
------------------------------
Available system uptime = 2 years, 40 weeks, 6 days, 1 hour, 45 minutes
Switchovers system experienced = 1
Standby failures = 4
Last switchover reason = active unit removed
Hardware Mode = Duplex
Configured Redundancy Mode = sso
Operating Redundancy Mode = sso
Maintenance Mode = Disabled
Communications = Up
Current Processor Information :
-------------------------------
Active Location = slot 1/5
Current Software state = ACTIVE
Uptime in current state = 2 years, 2 weeks, 1 day, 3 hours, 37 minutes
Image Version = Cisco IOS Software, c6880x Software (c6880x-ADVENTERPRISEK9-M), Version 15.2(1)SY7, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Thu 05-Jul-18 04:32 by prod_rel_team
BOOT =
CONFIG_FILE =
BOOTLDR =
Configuration register = 0x2102
Peer Processor Information :
----------------------------
Standby Location = slot 2/5
Current Software state = STANDBY HOT
Uptime in current state = 10 weeks, 3 hours, 30 minutes
Image Version = Cisco IOS Software, c6880x Software (c6880x-ADVENTERPRISEK9-M), Version 15.2(1)SY7, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Thu 05-Jul-18 04:32 by prod_rel_team
BOOT =
CONFIG_FILE =
BOOTLDR =
Configuration register = 0x2102
Be Safe '&' Have Fun
