11-13-2006 01:20 PM - edited 03-05-2019 12:47 PM
Hello,
Can i upgrade a Cisco 2950 IOS 12.0(5.3)WC(1) to a 12.1(22)EA5 and how do i do that?
I also have a 3750 12.2(25)SEB4 (i don't see it in this link http://www.cisco.com/en/US/products/hw/switches/ps5023/products_installation_and_configuration_guides_list.html. Is it same as SE* or can i upgrade to SEE?
Thanks
Daniel
11-13-2006 01:49 PM
Hi Daniel ,
Before upgarding it check the ram and flash size of the switch and how much flash and memory needed by ios .
Check the below link for upgradation procedure.
http://www.cisco.com/warp/public/473/191.html#configure2
Hope it helps you.
Thanks,
satish
11-13-2006 04:16 PM
Besides RAM/Flash size --- SEB4 is not the same as SE or SEE. If RAM/Flash OK, you should be able to upgrade directly to 12.2(25)SEE.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide