we are trying to use the SD Card Slot on an Cisco ME3600X (ME-3600X-24FS-M) IOS Version 15.2(4)S2.
If i try to copy a file from the sd card slot to the flash there is no Option like "slot0:" or something alse
and no syslog message appers while adding the SD Card.
/erase Erase destination file system.
/error Allow to copy error file.
bs: Copy from bs: file system
cns: Copy from cns: file system
flash: Copy from flash: file system
ftp: Copy from ftp: file system
http: Copy from http: file system
https: Copy from https: file system
logging Copy logging messages
null: Copy from null: file system
nvram: Copy from nvram: file system
rcp: Copy from rcp: file system
running-config Copy from current system configuration
scp: Copy from scp: file system
startup-config Copy from startup configuration
system: Copy from system: file system
tar: Copy from tar: file system
tftp: Copy from tftp: file system
tmpsys: Copy from tmpsys: file system
xmodem: Copy from xmodem: file system
ymodem: Copy from ymodem: file system
Can anyone help me?
SD Flash is currently not supported. The feature is in roadmap. The image
which is going to support it is 15.3(2)S, which is going to be released
*Plz rate if this is helpfull.