Using the Web Console (if possible) to manage a 2960 switch

[Kevin Melton]

Forum

I have a client whom has asked me to enable web management on some of his 2960 switches. I did not think this was going to be an issue, and so I told the customer I would set this up for him.

Much to my dismay, I have been able to get http and https enabled, and then authenticating locally for the HTTP access.  I then come to the screen once authenticated which is shown below:

The issue is that when I select "Web Console", it gives me a "Web Page Cannot be found".    Please tell me what I am missing here.  Thanks.

Kevin

[sorussiri]

HI i can already fix this problem. Just instal new ios from .tar file. You can download .tar file form cisco website or any website. and then ,You must to have only one tool. download it "tftp tool" https://bitbucket.org/phjounin/tftpd64/downloads/Tftpd64-4.64-setup.exe and watch this video https://www.youtube.com/watch?v=utSbMinOID4&t=342s credit the video owner >>> NetworkedMinds next time i will install new firmware with this way. XDXDXDXDXD

[Vishnurajasherkar]

I Have the same problem 

[pp4]

.