11-10-2017 08:38 PM - edited 03-08-2019 12:42 PM
Hi,
I have two WS-C3750G-12S core switches which are in stack. I have 5 access switches. Three of them are WS-C3750G-24PS and two of them are WS-C3850-48P which are in stack.
I have 140 cameras of American Dynamics. Some cameras connected to WS-C3850-48P getting an alert
and camera pause for fraction of seconds. Message is "Video loss alert begun for video edge IP Camera 'GF-CAM-02' on video edge 'NVR-01'. It is happening randomly. But none of the cameras connected to 3750 access switch have any alerts or any messages.
ios version of 3750 switch "c3750-ipbasek9-mz.122-55.SE11.bin"and
ios version of 3850 switch "cat3k_caa-universalk9.SPA.03.06.06.E.152-2.E6.bin "
Please help us to rectify. 3850 switches ios is safe harbor ios.
Regards
Abi
11-10-2017 08:49 PM
Check for QoS of both switch stacks.
11-10-2017 09:05 PM
Hi,
In both 3750 and 3850, there is no qos applied.
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide