Vlan.dat is not getting deleted....

[JeyaMohanMurugesan]

Hi,

I want to remove all the vlan information...

So i have done the below steps.

1. erase cat4000_flash:vlan.dat

MUMPR4ABR1#erase cat4000_flash:

Erasing the cat4000_flash filesystem will remove all files! Continue? [confirm]
[OK]
Erase of cat4000_flash: complete

2. MUMPR4ABR1#sh cat4000_flash:
# type length date/time name
-+----+------+---------+--------
1 bin       0 <no date> vlan.dat

524280 bytes available (0 bytes used)

3. Reload...

After reload , i checked the vlan information. But it is still showing the old vlan information.....

Kindly give me some solution.

[Traian Bratescu]

How is VTP configured (or is it a standalone switch)?

Traian

[JeyaMohanMurugesan]

It is an Access Switch....

[johnlloyd_13]

hi,

could you try:

delete const_nvram:vlan.dat

[JeyaMohanMurugesan]

I am unable to do that. If i use delete , it is showing Permission denied...

But now i have done the below two things.

MUMPR4ABR1#erase cat4000_flash:

MUMPR4ABR1#erase nvram

MUMPR4ABR1#reload

Now everything got deleted.. It was an old switch. Now i have put that in production with new config...