cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
395
Views
0
Helpful
1
Replies

VLAN Flapping Issue

mohindersingh
Level 1
Level 1

Hi,

In my network Vlan1 is flapping frequently.

If a laptop is connected to network with two different ways. for ex:- Laptop is connected with rj-45 cable to switch A and laptop is also connected to access point and access point is in turn connected to same switch (A)so the PC is connected with switch on two different points to same network.

Will it flap the vlan1 in the network?

Regards

Mahi

1 Reply 1

padramas
Cisco Employee
Cisco Employee

Hello Mahi,

It should not be the reason for vlan 1 flapping as wired NIC and wireless NIC card will have different mac addresses.

If issue still exists can you plz post the exact error message ?

HTH

Padmanabhan