cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
320
Views
8
Helpful
4
Replies
jaycer_cerbo
Beginner

VLAN, Inter-Vlan I need help...

Untitled.png

Hi guys. I just wanna ask if it's possible to block 192.168.98.2 pc from accessing the 192.168.99.11?

Router 0

interface GigabitEthernet0/0.98

encapsulation dot1Q 98

ip address 192.168.98.254 255.255.255.0

!

interface GigabitEthernet0/0.99

encapsulation dot1Q 99

ip address 192.168.99.254 255.255.255.0

!

VLAN 98 and VLAN 99 is already connect via Inter-Vlan. My problem now is, how can I block PC 192.168.98.2 from accessing PC 192.168.99.11?

Thanks

Best Regards,

Jaycer

jaycercerbo17@gmail.com

1 ACCEPTED SOLUTION

Accepted Solutions
paul driver
VIP Mentor

Hello

access-list 100 deny  ip host 192.168.98.2 host 192.168.99.11

access-list 100 permit ip any any

interface GigabitEthernet0/0.98

ip access-group 100 in

or

interface GigabitEthernet0/0.99

ip access-group 100 out

res

Paul

Please don't forget to rate any posts that have been helpful.

Thanks.



kind regards
Paul

Please rate and mark posts accordingly if you have found any of the information provided useful.
It will hopefully assist others with similar issues in the future

View solution in original post

4 REPLIES 4
chandra_rc16
Enthusiast

Hope this link helps you:

http://www.cisco.com/c/en/us/support/docs/security/ios-firewall/23602-confaccesslists.html

Don't forget to rate the posts that are helpful.

Regards,
Chandu

Regards, Chandu

Thank you also for this. Helps me to review my ACL

paul driver
VIP Mentor

Hello

access-list 100 deny  ip host 192.168.98.2 host 192.168.99.11

access-list 100 permit ip any any

interface GigabitEthernet0/0.98

ip access-group 100 in

or

interface GigabitEthernet0/0.99

ip access-group 100 out

res

Paul

Please don't forget to rate any posts that have been helpful.

Thanks.



kind regards
Paul

Please rate and mark posts accordingly if you have found any of the information provided useful.
It will hopefully assist others with similar issues in the future

View solution in original post

Mr. pdriver thank you so much! Big help for me.