06-26-2019 08:14 PM
Hi All,
Today, i came across an issue according to which i found the interfaces on cisco switch 4507 were in different access vlan and were not under the business vlan which was configured and was working from past few months. Checked the logs but didnot found anything as such, not sure how come the access vlan got changed automatically, this issue was not for 2-3 interfaces , was however found for 150 ports approx.
Can anyone help me, if they have come across such issue, what can be done to figure it out. OR is it a bug or switch malfunction.
Current IOS version : cat4500e-universalk9.SPA.03.04.06.SG.151-2.SG6.bin
Switch Uptime : more than 2 years
06-26-2019 08:39 PM
It was almost certainly done by a human. Most likely, an accident. Switches don't change their VLANs.
If their is a management platform or SNMP write is enabled then it could have done it as well.
if vstack has now been disabled it could also have been done via that.
06-26-2019 09:02 PM
06-27-2019 12:29 AM
@ankit_srivastava_91 wrote:
were not under the business vlan which was configured and was working from past few months.
Post the first two lines to the command "sh run".
@ankit_srivastava_91 wrote:
there is no vstack it's a chassis.
Post the complete command to the command "sh vstack config".
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide