vlan routing

[blue4cisco]

I have 3550 with single vlan running with covering 5 ports like

vlan 3=ip 192.168.12.3

it connects my servers in same address group.

Now I want another vlan using 1 port like

vlan 4:ip 172.56.2.1

I want my server(192.168.12.*) can access 172.56.2.* series devices. pls input how does it possible ?

[makstilcisco]

see this link

http://www.cisco.com/en/US/tech/tk389/tk815/technologies_configuration_example09186a008015f17a.shtm

[andrew.prince]

That is a dead link, try the below:-

http://www.cisco.com/en/US/tech/tk389/tk815/technologies_configuration_example09186a008015f17a.shtml

HTH>

[chris.macleod]

Hi,

Just create your VLANs on the 3550 and assign the IPs to them then enter global command "ip routing" to enable routing on the 3550. Use the appropriate VLAN IP as your servers and clients default gateway.

You may also want to set a default route if these devices require internet access.

Chris