VLAN tagging - remove tag from packet

[N.ima0102]

Hi

I am a little confused on VLAN tagging on input and output interface.

In our company,clients has been connected to one switch (layer 2) and all ports are in VLAN 10. On this switch we have plugged one port to core switch as uplink for all clients and this port is trunk.

Core-Switch--

---

Uplink(trunk)

---

LAN-Switch

---

Downlink(VLAN10)--

---

Client

My doubt is,are all sent packet to client tagged with VLAN 10? That means,Does client receive packets with VLAN tag? If so, is there any solution that remove VLAN tag from packet on output interface to client?

In fact I want to remove tag from packet on output interface to client,because our clients do not handle tagged packets.

Thanks in advance

Sent from Cisco Technical Support iPad App

[Giuseppe Larosa]

Hello Nima,

vlan tags are automatically removed out of access ports no need for special configuration.

An access port is member of only one vlan, so no form of vlan tagging is needed for traffic sent and received on it

You should be already fine.

Hope to help

Giuseppe