vPC with portfast or edge trunk

[marouasa]

Hello all, 

Can we have portfast enabled in a vPC port that is facing a server or is it better to enable edge trunk on that port ? 

Thanks for your feedback.

[MHM Cisco World · Accepted solution]

 edge port in nsk is same as portfadt in other cisco SW.

You can use edge trunk for server sure 

MHM

[Pavel Tarakanov · Accepted solution]

spanning-tree port type edge trunk

is typical config for endpoint facing ports for NX-OS. Portfast - in IOS/IOS-XE

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_2/nx-os/layer2/configuration/guide/Cisco_Nexus_7000_Series_NX-OS_Layer_2_Switching_Configuration_Guide_Release_4-2_chapter8.html

[paul driver]

hello
Portfast edge trunk if  the pc is a trunk
Portfast edge if it the pc is an access 

edited - just like to state be careful only enable portfast edge trunk to a trunk ONLY if you are sure it connecting to an edge device such as as server and not another switch 

[Joseph W. Doherty]

Whether to have a port flagged as a STP edge port is NOT directly related to it carrying a single VLAN or many.  They are different considerations.

This can be easily misunderstood because a single VLAN port is most commonly used for edge hosts while a multi VLAN port is commonly used with other switches.